247 Emergency Electrical Repairs

24/7 emergency electrical repairs are a critical service for homeowners and businesses alike. Electrical issues can arise unexpectedly at any time, and they can pose a significant risk to the safety of individuals and property. Whether it’s a power outage, a tripped circuit breaker, or an electrical fire, an emergency electrician can quickly diagnose and repair the issue to restore power and prevent further damage.

Emergency electricians are available around the clock, 24 hours a day, seven days a week, to provide immediate assistance when electrical problems occur. They have the training and expertise to handle a wide range of electrical emergencies, from minor repairs to major electrical failures. Emergency electricians are equipped with specialized tools and equipment to quickly diagnose and repair issues, allowing them to restore power and ensure the safety of the property and its occupants.

Some common emergency electrical repair services include:

1. Electrical Troubleshooting: An emergency electrician can quickly identify the cause of an electrical issue, such as power outages, tripped breakers, and faulty wiring.

2. Electrical DB Board Repair and Replacement: Faulty electrical panels can cause a range of issues, including power outages and electrical fires. An emergency electrician can repair or replace the panel to restore power and prevent further damage.

3. Electrical Outlet and Switch Repair: Broken or malfunctioning outlets and switches can cause electrical shock and fire hazards. Emergency electricians can repair or replace these fixtures to ensure the safety of the property and its occupants.

4. Electrical Wiring Repair: Faulty electrical wiring can cause power outages and electrical fires. An emergency electrician can diagnose and repair the issue to restore power and prevent further damage.

5. Generator Installation and Repair: Generators can provide backup power during a power outage. Emergency electricians can install and repair generators to ensure they are functioning properly when needed.

Overall, 24/7 emergency electrical repairs are an essential service for homeowners and businesses. In case of an electrical emergency, it’s crucial to contact a licensed and experienced emergency electrician to quickly and safely diagnose and repair the issue.

Electrical Certificate of Compliance COC

An Electrical Certificate of Compliance (COC) is a document that is issued by a registered electrical contractor in South Africa, which confirms that electrical work has been completed safely and according to the required standards. This document is required by law and must be provided to the relevant authorities when selling, buying or renting a property in South Africa.

The Electrical COC is issued to confirm that the electrical installation or work carried out at a particular property is in compliance with the regulations and standards set out by the South African National Standards (SANS) 10142-1, which is the Code of Practice for the Wiring of Premises in South Africa. The certificate includes information such as the name of the registered electrical contractor, the property address, the date of inspection, and details of the electrical installation or work completed.

The COC must be issued by a registered electrical contractor who has been approved by the Department of Labour to carry out electrical work in South Africa. The contractor must be licensed and must comply with the relevant safety standards and regulations. The electrical installation or work must also be inspected by a registered electrical inspector before the COC is issued.

It’s important to note that the COC is not a guarantee of the electrical installation or work’s ongoing safety and compliance. It is a snapshot of the state of the installation or work at the time of the inspection. However, the COC does give the buyer or tenant assurance that the electrical installation or work meets the required standards at the time of the inspection.

In summary, the Electrical Certificate of Compliance is an essential document required by law for the sale, purchase or rental of a property in South Africa. It confirms that the electrical work completed at the property meets the required safety standards and regulations. It’s important to ensure that the electrical contractor and inspector are registered and licensed to ensure the safety of the property and its occupants.

Plugs & Light Switches Installation

Installing plugs and switches is a common task in electrical work that involves wiring electrical outlets and switches to provide power to appliances and lighting fixtures. While the installation process may seem straightforward, it’s crucial to ensure that it’s done correctly to avoid electrical hazards and ensure the safety of the property and its occupants.

Here are some steps to follow when installing plugs and switches:

1. Turn off the power: Before starting any electrical work, it’s essential to turn off the power to the area where the plugs or switches will be installed. This can be done by turning off the circuit breaker or removing the fuse that controls the power to the area.

2. Remove the old outlet or switch: If you are replacing an old outlet or switch, you’ll need to remove it from the wall. This can be done by removing the cover plate and unscrewing the mounting screws.

3. Prepare the wiring: The wiring for the new outlet or switch must be prepared before installation. This includes stripping the wires, removing any old insulation, and connecting the wires to the new outlet or switch.

4. Mount the outlet or switch: Once the wiring is prepared, the new outlet or switch can be mounted to the wall. The mounting screws should be tightened securely, and the cover plate should be replaced.

5. Test the new outlet or switch: After the installation is complete, it’s important to test the new outlet or switch to ensure that it’s working correctly. This can be done by turning the power back on and plugging in a device or flipping the switch to test the connection.

It’s important to note that electrical work should only be performed by a licensed and experienced electrician. Incorrectly installed plugs and switches can cause electrical hazards and pose a significant risk to the safety of the property and its occupants.

How to conduct an electrical faulty finding

Electrical fault finding is the process of identifying and diagnosing electrical faults or problems in a circuit or system. Electrical faults can occur for various reasons, such as damaged cables, worn out components, or incorrect installations. Faulty electrical systems can lead to power outages, electrical fires, and other hazards, so it’s essential to identify and fix them as soon as possible.

Here are some steps to follow when finding electrical faults:

1. Identify the problem: The first step is to identify the problem by observing any symptoms or signs that something is wrong. These could include flickering lights, power outages, or unusual noises.

2. Isolate the circuit: Once you’ve identified the problem, you need to isolate the circuit that’s causing the issue. This can be done by turning off the power to the affected area and disconnecting any devices or appliances connected to the circuit.

3. Inspect the wiring: Inspect the wiring for any damage, such as frayed or burnt wires, loose connections, or broken components. Use a multimeter to test the wiring for continuity and check for any signs of overheating or burning.

4. Test components: Check the components, such as switches, fuses, and circuit breakers, for any signs of damage or wear. Test them using a multimeter to ensure they’re functioning correctly.

5. Repair or replace faulty components: Once you’ve identified the faulty component or wiring, you’ll need to repair or replace it. This can involve rewiring the circuit, replacing switches or fuses, or installing new components.

6. Test the circuit: After completing the repairs, test the circuit to ensure that it’s functioning correctly. Turn on the power and test the devices or appliances connected to the circuit.

It’s essential to practice caution when conducting electrical fault finding, as electrical work can be dangerous. If you’re unsure about the process or the problem, it’s best to contact a licensed and experienced electrician to identify and fix the fault. Electrical faults should be addressed promptly to avoid potential hazards and ensure the safety of the property and its occupants.

What causes Earth leakage Main Switch to rip on the DB Board?

An earth leakage device, also known as a residual current device (RCD), is designed to protect against electrical faults that can lead to electrocution or fire. The device monitors the electrical current flowing through a circuit and quickly shuts off power if an imbalance is detected. This imbalance can occur when the electrical current travels through an unintended path, such as through a person’s body or damaged wiring, and causes a ground fault. Here are some common causes of earth leakage to trip:

1. Faulty appliances: A common cause of earth leakage is a faulty or damaged appliance. When an appliance has a damaged cord, a frayed wire, or other faults, it can cause the electrical current to flow to the ground, tripping the earth leakage device.

2. Water exposure: Water is an excellent conductor of electricity and can cause an earth leakage to trip. Electrical devices that are exposed to water, such as outdoor outlets or appliances, can cause an earth leakage. This can be your outside lights, gate motor, or an electrical fence. Book an electrician now

3. Wiring faults: Wiring faults, such as loose or corroded connections, can cause an earth leakage to trip. Wiring faults can also occur when electrical devices are not installed correctly or when wires are damaged.

4. Lightning strikes: Lightning strikes can cause electrical surges that can trip an earth leakage device. While rare, lightning strikes can cause significant damage to electrical systems, and it’s essential to have surge protection in place to prevent damage.

5. Overloaded circuits: Overloaded circuits can cause an earth leakage device to trip. When there are too many electrical devices or appliances connected to a single circuit, the electrical current can exceed the circuit’s capacity and cause an earth leakage.

6. Ground faults: A ground fault occurs when an electrical current flows through a path that’s not intended, such as through a person’s body or the ground. Ground faults can cause an earth leakage device to trip, preventing electrocution or fire.

It’s essential to ensure that earth leakage devices are installed correctly and maintained regularly to prevent accidents and ensure the safety of the property and its occupants. If you experience frequent earth leakage tripping, it’s best to contact a licensed and experienced electrician to identify and fix the problem.

How to fix earth leakage tripping power in the house?

If your earth leakage device is tripping frequently, it’s essential to take action to prevent electrical hazards and ensure the safety of your property and its occupants. Here are some steps to follow to fix earth leakage tripping power in the house:

1. Identify the cause: The first step in fixing earth leakage tripping power is to identify the cause. Check all electrical devices and appliances for signs of damage or wear, and make sure all wiring connections are secure.

2. Unplug faulty devices: If you identify a faulty device or appliance, unplug it and have it repaired or replaced by a licensed and experienced electrician.

3. Check for water damage: Water exposure can cause earth leakage tripping power. Check all outdoor outlets, appliances, and electrical devices for signs of water exposure, and make sure they are protected from rain and other forms of water.

4. Check the wiring: Faulty wiring can cause earth leakage tripping power. Check all wiring connections and make sure they are secure and not corroded. If you find any wiring issues, have them repaired by a licensed and experienced electrician.

5. Reset the earth leakage device: Once you have identified and fixed the cause of the earth leakage tripping power, reset the earth leakage device. This can be done by turning off the circuit breaker that controls the affected circuit and then turning it back on.

6. Test the device: Test the earth leakage device to ensure it’s functioning correctly. This can be done by using a testing device or by plugging in a known working appliance and seeing if the earth leakage device trips.

If you’re unsure about the cause of the earth leakage tripping power or how to fix it, it’s best to contact a licensed and experienced electrician. They can identify and fix the problem quickly and safely, ensuring the safety of your property and its occupants.

What causes a geyser to trip power?

What causes the geyser not to have hot water?

A geyser can trip the power for various reasons, including:

1. Electrical overload: Geyser elements require a significant amount of power to heat water. When a geyser is overloaded, it can trip the power. Overloading can occur when multiple appliances are running simultaneously, or when the geyser’s capacity is exceeded.

2. Faulty thermostat: A faulty thermostat can cause a geyser to trip the power. The thermostat regulates the temperature of the geyser and can malfunction, causing the geyser to overheat and trip the power.

3. Faulty element: A faulty heating element can cause a geyser to trip the power. The heating element can burn out or malfunction, causing the geyser to overheat and trip the power.

4. Short circuit: A short circuit in the wiring of the geyser can cause it to trip the power. Short circuits can occur when wiring connections become loose or damaged.

5. Earth leakage: An earth leakage device can also trip the power to a geyser. This can occur when water comes into contact with the electrical wiring or when the geyser develops a fault that causes an electrical current to flow to the ground.

How to fix a geyser that keeps tripping the power?

1. Check the circuit breaker: The first step in fixing a geyser that keeps tripping the power is to check the circuit breaker. If the circuit breaker has tripped, reset it and see if the geyser continues to trip the power. If the circuit breaker trips again, there is likely a fault in the geyser.

2. Check the thermostat: If the circuit breaker isn’t tripped, check the thermostat. Ensure that it’s set to the correct temperature and that it’s functioning correctly. If it’s faulty, replace it.

3. Check the heating element: If the thermostat is functioning correctly, check the heating element. Turn off the power to the geyser and remove the heating element to inspect it. If it’s burnt out or damaged, replace it.

4. Check the wiring: If the heating element is functioning correctly, check the wiring. Ensure that all wiring connections are secure and not corroded. If you find any wiring issues, have them repaired by a licensed and experienced electrician.

5. Check for water leaks: If there are water leaks in the geyser, water can come into contact with the electrical wiring, causing an earth leakage. If you find any water leaks, have them repaired immediately.

6. Test the earth leakage device: Test the earth leakage device to ensure it’s functioning correctly. This can be done by using a testing device or by plugging in a known working appliance and seeing if the earth leakage device trips.

If you’re unsure about the cause of the geyser tripping the power or how to fix it, it’s best to contact a REGISTERED and experienced electrician. They can identify and fix the problem quickly and safely, ensuring the safety of your property and its occupants.

What causes an electric fence not to function? 

An electric fence not functioning can be caused by various factors, including:

1. Power supply: The most common cause of electric fences not functioning is a power supply issue. If there’s a power outage or the electric fence’s power source is disrupted, it won’t function.

2. Broken wires: Electric fences consist of numerous wires that transmit electricity. If any of the wires are broken or damaged, the electric fence won’t function correctly.

3. Faulty insulators: Insulators are plastic or porcelain fittings that hold the electric fence wires in place. If the insulators are damaged, the wires may come into contact with the fence posts or ground, causing a short circuit and rendering the electric fence useless.

4. Poor grounding: An electric fence requires proper grounding to function correctly. If the grounding is inadequate, the electric fence won’t function effectively.

5. Faulty energizer: The energizer is the power source for the electric fence. If it’s faulty or not functioning correctly, the electric fence won’t function.

How to fix an electric fence that’s not functioning well?

1. Check the power supply: The first step in fixing an electric fence that’s not functioning is to check the power supply. Ensure that the electric fence’s power source is working correctly and that there’s no power outage. If there’s a power outage, wait until power is restored, and the electric fence should start functioning.

2. Inspect the wires: Inspect all the electric fence wires for any breakages or damage. If any wires are broken or damaged, they need to be repaired or replaced. This can be done by splicing the wire or replacing the entire length of wire.

3. Check the insulators: Inspect all the insulators to ensure they’re not damaged or broken. If any of the insulators are damaged, they need to be replaced.

4. Check the grounding: Check the grounding of the electric fence to ensure it’s adequate. Ensure that the ground rods are installed correctly and that they’re not corroded or damaged. If the grounding is inadequate, install additional ground rods or contact a licensed electrician.

5. Test the energizer: Test the energizer to ensure it’s functioning correctly. If it’s not working, replace it with a new one.

In conclusion, fixing an electric fence that’s not functioning requires identifying the underlying cause of the problem. If you’re unsure about the cause of the issue or how to fix it, it’s best to contact a licensed and experienced electric fence technician. They can identify and fix the problem quickly and safely, ensuring the safety of your property and its occupants.

How much does it cost to rewire a house in South Africa?

The cost of rewiring a house in South Africa can vary depending on several factors, such as the size of the house, the complexity of the wiring required, and the quality of the materials used. Book an Electrician now

On average, the cost of rewiring a house in South Africa can range from R5,000 to R100,000 or more, depending on the factors mentioned above.

It’s essential to hire a licensed and experienced electrician to carry out the rewiring project. They can assess the wiring requirements and provide a detailed quote based on the specific needs of your home. Additionally, ensure that the electrician uses high-quality materials and adheres to all the necessary safety regulations and standards to ensure the safety of your home and its occupants. Get a quote for house rewiring now